Thermo Fisher Scientific Eutech COND/TDS/Salt 6 Plus - Manual (Page 6)

Instruction Manual COND 6+, TDS 6+, SALT 6+
-1-
1. INTRODUCTION
Thank you for purchasing the COND 6+, TDS 6+, or SALT 6+ meter. These
microprocessor-based handheld meters are economical and easy to use. It has a large
custom LCD (Liquid Crystal Display) for clear and easy reading.
The Cond 6+ measures conductivity (µS/cm or mS/cm) and temperature (°C) while the
TDS 6+ measures total dissolved solids (TDS) in parts per million (ppm) or parts per
thousand (ppt) and temperature (°C). Each measures up to 5 different ranges and can
automatically switch to appropriate measuring range.
The Salt 6+ measures salinity (as NaCl) in % salt or ppt and temperature (°C).
Your meter includes an electrode (cell constant K = 1.0) with built-in temperature sensor
(ECCONSEN91B), rubber armour, 4 alkaline “AAA” batteries, instruction manual and
warranty card.
Please read this manual thoroughly before operating your meter.
To order other accessories and buffer standard solutions, please refer to the
accessories section for more information.