Installation – Techne HB-1D User Manual
Page 19

19
INSTALLATION
See also the sections on Safety and Installation.
1. Place the unit on a suitable flat bench or in a fume cupboard if required, ensuring that the air inlet
and outlet vents are free from obstruction.
2. Place some water in a hybridisation tube and fit the tube in the HB-1D.
Adjust the feet on the base
of the unit by unscrewing them anticlockwise slightly until the unit is level. Check the level by
placing the tube in different positions in the oven.
3. Plug the mains cable into the power socket on the rear of the unit.
Rear view of the HB-1D