Revo REXT650-1 - Manual (Page 14)

System Init
 Cancel : Back to General Setup Menu.
 Confirm : Initialize all data. (Factory Default)
3) Lens
 Iris : DC, Video, Manual Lens selected Iris : adjust AE Speed
 DC lens and video lens can adjust AE Speed
 Normal AE Ref (Auto Exposure Reference Level) : Press the Enter button to access
the AE Ref.
 Ref Lvl : Adjust AE base reference level.
WDR Ref : Press the Enter button to access the WDR Ref.
 Ref Lvl : Adjust the WDR long-time control Base Reference Level.
4) LLC(Line Lock Control) : Press the Enter button to access the Line Lock mode.
 Func : Select Line Lock function On/Off using the Left and Right buttons.
 Phase : Adjust Line Lock sync phase using the Left and Right buttons. (0~100)
Activate only AC power inputted.
5) White Pixel
 Det Exe : Press Enter button to turn White Pixel Compensation mode Start.
 ENT to Adj : Press Enter button to start White Pixel Compensation start.
 Proc : Process to find white pixel.
 Done : Process ended
 Det Count : Result of white pixel detection.
 Func : Select erasing white pixel function On/Off using the Left and Right buttons.
 Det Level : Select the judgment level of white pixel using the Left and Right buttons
(1~16)
Det View : Select display of detected white pixel.
6) Day/Night
 Mode : Select D&N mode.
 Auto : Filter operates automatically according to brightness.
 Day : The camera outputs the video image only in color.
 Night : The camera outputs the video image only in black and white.
 Ext : This menu automatically converts the COLOR Mode into the B/W Mode or
vice versa depending on illumination with an external sensor.
Night Mode : Select B/W Burst On/Off
 Delay(s) : Adjust the working time of the filter when D&N mode is Auto (1-60 sec).
 D>N Level : Select switching level Day to Night when D&N mode is Auto (0-15).
 N>D Level : Select switching level Night to Color when D&N mode is Auto (0-15).
When user entered in main menu and sub-menus, following menus will be appeared.
I.Main Manu (menu in bottom lines)
A. Exit : Save & Exit.
B. Load : Load Default Value.
II.Sub Menu (menu in bottom lines)
A. Return : Return to previous menu.
B. Exit : Save & Exit
1) Exit Menu
 Save&Exit : Current environment values save.
 Exit : Disappear menu osd.
2) Load Default Setup
 Yes : Load default to current configuration. and return to previous menu.
 No : No operation, and return to previous menu.
- 8 -