Revo REXT650-1 - Manual (Page 10)

- 4 -
3) EHLC(Excessive High Light Compensation) : EHLC mode on.
 excessive lighting compensation is performed when the weighting on the
high-brightness side is increased.
4) Auto(Auto Weighting BLC) : Auto weighting BLC on.
5) Spot(User Setting BLC area) : Spot metering mode on.
 Posi : OSD mode to adjust the position of the spot metering area.
 Size : OSD mode to adjust the size of the spot metering area.
6) Zone(Preset BLC area) : Fixed metering area mode. (1-9).
1) Mask: Select mask area(1-15).
2) Func: Select mask function.(Privacy, BLM, Both, Off).
 Privacy : Area to screen on the display.
 BLM : Back Light Mask.
 Selected BL Mask area that will be except of the auto exposure
 If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it
possible to view car license plates efficiently.
 Both : Privacy function and BLM function on.
 Off : Function off.
3) Edit : Mask area edit.
 Edit mode take effect during Func not Off.
 Size : adjust the size of the Privacy and BLM mask area.
 Posi : adjust the position of the Privacy and BLM mask area.
 Tilt : adjust tilting of Privacy and BLM mask area.
 Color: Select Privacy and BLM mask (0-14).
 Transparency: Select Privacy mask transparency (Default 3/0-3).
 Mosaic: Select Privacy and BLM mask mosaic On/Off
 Adj. Mosaic: Adjust Privacy and BLM mask mosaic level (0-31).
 Func : Detection function selection.
 Sens Down : Adjust to Motion Sensitivity using left/right Buttons.
1) OFF : Detection function off.
2) Zone : Area motion detection mode.
 Zone : Select Motion detection zone (Zone1-4).
 Func : Select Motion detection on/off.
 Size : Press Enter button to adjust the size of the Motion detection area.
 Posi : Press Enter button to adjust the position of the Motion detection area.
 Link Zoom : Select Motion detection with D-PTZ function that On/Off .
 When the motion triggered in the area, zoom and move to the area with D-PTZ.
3) Motion Trace : Motion trace mode on.
 Tracks an object through a scene and generates an alarm.
4) Face Trace : Face Trace mode on.
 Tracks face through a scene and generates an alarm.
 Sens Down : lower value is more widen the scope to judge face. (0~127)
Min Size : Minimum face size configuration (0 : minimum face size is to none)
The result of face trace can be inaccuracy.