Quick setup wizard – Revo R4CMB-500 User Manual

Page 12

User’s Manual

Before using your DVR for the first time, you will want to establish the initial settings. The following describes how
to use the mouse and remote control in the setup screen. Take a minute to review the descriptions.

Mouse

Remote Control (Optional)

To enter the setup
screen

…

In the Live Monitoring mode, move the
mouse pointer to the top of the screen to
display hidden menu icons. Click the

(Setup) icon with the left button.

In Live Monitoring mode, press the

button to display the menu icons at the top
of the screen. Select the

(Setup) icon by

pressing the

button.

To select items

…

Click the desired item with the left button.

Move to the desired item by pressing the
arrow buttons ( ) and select it by
pressing the

button.

To change values

…

Select the desired item with the left button
and roll the mouse wheel up and down to
increase or decrease the values.

Select the desired item and press the Up and
Down arrow buttons ( ) to increase or
decrease the values and then press the

button to complete the entry.

To enter characters

…

Select the desired item with the left button
to displays a virtual keyboard. Click the
desired character with the left button.

Select the desired item and press the

button to displays a virtual keyboard. Move
to the desired character by pressing the arrow
buttons, and press the

button.

NOTE: For simplicity, most of the operation explanations in this manual are based on using the Remote Control.

While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.

Use the arrow buttons on the remote control to highlight the character you want in
the name or title and press the

button. That character appears in the title bar and

the cursor moves to the next position. Selecting

toggles between the upper and

lower case keyboards,

backspaces, and deletes entered characters. You can

use up to 31 characters including spaces in your title.

QUICK SETUP WIZARD

When you turn the system on for the first time, the Quick Setup Wizard will run. The Quick Setup Wizard guides you
through configuring the system for basic operation. The wizard also can be accessed by selecting Quick Setup in the
Main Setup screen. Refer to the following Advanced Setup section.

Select the Next button to start the Quick Setup Wizard.

NOTE: Selecting the Cancel button throughout the screens
exits the Quick Setup Wizard without saving your changes
and return to the Live Monitoring mode.