Pyromation Dual J-T-E-K User Manual

Page 23

1. Momentarily press the STORE key. Both T1 and

T2 are stored. The upper main display will mo-
mentarily show the storage location number and
the STO annunciator will be on.

After three seconds the storage number will be re-
placed with the temperature reading but the STO
annunciator remains on to indicate a temperature
reading has been stored. The STORE key may be
pressed as fast as once per second.

2. Repeat step 1 for all the points to be recorded

up to a maximum of 25. Each time the STORE
key is pressed the new reading will be stored
and the upper main display will show the stor-
age location number for about 3 seconds. After
25 stored readings, the next time the STORE
key is pressed the main display will indicate
FULL.

RECALL READINGS

This function allows the stored readings to be re-
called. RECALL shows each stored reading indi-
vidually. To recall readings proceed as follows:

1. Momentarily press the RECALL key, the first

stored reading will be displayed on the lower dis-
play and the store number “1” will be displayed
on the upper display. The STO, and RCL an-
nunciators will be on.

2. To step through the readings, press the

MIN

key or the MAX

key. Each press of

the key will advance to the next reading in se-
quence.

3. To return to normal operation press any other

key except ON/OFF, MAX

, MIN

or RE-

CALL.

Clearing Stored Readings

Press the CLEAR key, then the STORE key. The
stored readings in memory will be cleared.