Pyromation Dual J-T-E-K - Manual (Page 14)

12
QUICK SETUP
Note: Review warnings on page 6.
1. Install batteries.
2. Connect thermocouple(s).
3. Press the ON/OFF key. The thermometer per-
forms a self-test and all display digits and indi-
cators, as shown below, should remain on for
approximately one second.
4. Use J-T-E-K key to select the correct thermo-
couple and the °C/°F key to select the desired
scale.
This message also appears if a thermocouple is
broken. No measurements can be made while this
warning is displayed.
If a thermocouple has not yet been connected to
one or more inputs on the instrument, you will see
this display: