Pyromation Dual J-T-E-K - Manual (Page 18)

16
Single Probe Measurements
The displayed information depends on whether you
are using a single probe in the dual probe mode or
have changed to the single probe differential mode
by pressing the T1/T2 key.
If you are using a single probe and in the dual probe
mode, momentarily press the MAX
s
key. The
MAX annunciator turns on. If the probe is connected
to T1 the maximum reading will be shown in the
lower left display. If the probe is connected to T2
the maximum reading will be shown in the lower
right display. If a higher maximum occurs while in
the MAX mode, the higher reading will be displayed.
To turn off the maximum reading, press the MAX
s
key again.
If you are in the single probe differential mode,
momentarily press the MAX
s
key. The MAX and
MIN annunciators turn on and both the maximum
and minimum readings appear in the lower displays.
The minimum will be on the left display and the
maximum on the right display. If a higher maximum
or lower minimum occurs while in the MAX mode,
the higher reading will be displayed. To turn off the
maximum reading, press the MAX
s
key again.