Precision Control Systems ProfileIR 4069P - Manual (Page 24)

Model 4069 ProfileIR TM User Manual Operation
Research, Inc. 21
covered roller and sensor,
when enabled it will change
the output power level to 0
when no motion is detected
for more than 2 seconds.
AIR CURE An optional air cure feature is available for the 4069P.
The air cure feature, when installed, can be enabled and disabled by
this selection. When enabled, a solenoid valve will be opened when
starting a recipe, allowing compressed air, directed by adjustable
nozzles, to be directed through the heating chamber.
LINE FREQUENCY The system is capable of running on AC power
at 60 Hz (USA) or at 50 Hz (Europe). This selection must be set
appropriately in order for the output power levels to work correctly.