Martel Electronics 320 - Manual (Page 9)

auto calibration does not in any way affect the primary
calibration done at the factory or at a field metrology
lab using available software and suitable standards.
During the time the start-up tests and calibrations are
being performed, certain informational displays are
presented to show the status of the calibrator. The
first message displayed will be:
Beta Gauge
01/04/94
This indicates the date in MM/DD/YY format of the
last factory calibration. The example indicates the
Model 320 was calibrated on Jan. 4, 1994. If the unit
has been recalibraed in the field, the date will be
displayed in a MM-DD-YY format. See page 26 for a
description of the calibration procedure.
The next display will be:
property of
YOUR NAME HERE
7