KYORITSU KEW Windows for KEW 3127 Windows Vista/7/8 - Manual

KEW Windows for KEW3127 (6) Click“Finish”when“InstallShield Wizard Complete”
dialog box appears.
(7) When above installation wizard completes, subsequent
installation initiates automatically. If you rebooted your
PC at step (5), double click the CD drive in“My
computer”to show the following window.
(8) Repeat above step (3) through (6) and complete
installation.
How to un-install the PC Software:
Access to the“ Control Panel”in the Start Menu at the
lower left on the Windows screen, and double click on
the“Add/ Remove Programs”to remove the“KEW
WindowsV2”and“KEW Windows for KEW3127”.
Installation Manual
KEW3127
This manual contains instructions how to install the software
“ KEW Windows for KEW3127”.
1. Introduction
● Interface
This instrument is equipped with USB and Bluetooth
interfaces.
Communication method : USB Ver2.0
Bluetooth : Bluetooth Ver2.1+EDR (Class2)
Compliant profile: SPP
The following can be done by USB/ Bluetooth communication.
* Downloading files in the internal memory of the
instrument to PC
* Making settings for the instrument via PC
* Displaying the measured results on PC as graphs in real-
time, and also saving the measured data at the same time
● System Requirements
・OS(Operating System)
For supported OS, please check the version label of the
CD case or visit our website.
・Display
1024 × 768 dots, 65536 colors or more
・HDD (Hard-disk space required)
1Gbyte or more (including Framework)
・.NET Framework (3.5 or more)
● Trademark
・Windows ® is a registered trademark of Microsoft in the
United States.
・Pentium is a registered trademark of Intel in the United
States.
・Bluetooth is a registered trademark of Bluetooth SIG.
The latest software is available for download from our
homepage.
http://www.kew-ltd.co.jp
KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
2. Installing the“KEW Windows for KEW3127”
(For Windows 7 / Vista / XP)
(1) The following should be checked before installing this
software.
・To prepare your system for installation, please close all
open programs.
・Be sure NOT to connect the instrument with the USB
until installation completes.
・Installation shall be done with Administrator right.
(2) Insert the CD-ROM in your PC's CD-ROM drive.
Click the“Run KEWSetupLauncher2.exe”when the
“ AutoPlay”pop-up window appears on Windows Vista or
Windows 7. If the installer doesn't run automatically,
double click the“ KEWLauncher2.exe”in the CD icon. If
the User Account Control dialog box appears, click
“ Yes”.
(3) Read through and understand the License Agreement and
click“ I accept….”, and then click“ Next”.
(4) Click“Next”after entering the user information and other
supplementary information.
(5) Confirm the information on installation, and then click
“ Install”to start installation. If a message requiring
restarting your computer is displayed, click“Yes”and
restart your computer. Installation process will then
restart. Restarting your computer is essential to install
the software properly.
(For Windows 8)
(1) The following should be checked before installing this
application.
・To prepare your system for installation, please close all
open programs.
・Be sure NOT to connect the instrument with the USB
until installation completes.
・Installation shall be done with Administrator right.
・To use KEW Windows for KEW3127, .NET Framework
3.5 is required. If .NET Framework 3.5 is not installed
in your PC, it will be automatically installed when
installing this application. An internet connection is
required to install .NET Framework 3.5.
(2) Insert the CD-ROM in your PC's CD-ROM drive. Then
the following pop-up will appear at the upper right on the
screen. Left-click on this box.
(3) Click and select“Run KEWSetupLauncher2.exe”when the
following box appears. If User Account Control dialog box
appears, click“Yes”.
If neither (2) nor (3) appears, run“KEWSetupLauncher2.
exe”from the CD.
The following box will appear if .NET Framework3.5 is not
installed in your PC.
If a message requiring restarting your PC is displayed,
click“Yes”and restart your PC. Run“KEWSetupLauncher2.
exe”from the CD after restarting the PC.
(8) When the installation wizard completes, subsequent
installation initiates automatically.
(9) Repeat above step (4) through (7) and complete installation.
How to un-install the PC Software:
Access to the“Control Panel”and double click on
the“Add/ Remove Programs”to remove the“KEW
WindowsV2”and “KEW Windows for KEW3127”.
3. Installing the USB driver
(For Windows 7 / Vista)
When the balloon shown below appears after connecting the
product and your PC by using the USB cord, please install
the USB driver according to the following procedure.
(1) Click"Start menu”->“Control Panel”->“Device Manager”.
* If the displayed Control Panel is similar to the one shown
below, change the View by Category to Large icons.
(2) Click“Other devices”and then right-click on“MODEL
8212USB”. Then click“Update Driver Software”.
(3) Select“Browse my computer for driver software”.
(4) Check the box for“Include subfolders”, and then
click“Browse”.
(5) Select the disk drive in which the CD resides and click
OK.
(4) Read through and understand the License Agreement and
click“ I accept….”, and then click“ Next”.
(5) Click“Next”after entering the user information and other
supplementary information. Ensure that an internet
connection is established, otherwise the installation
of this application may be incomplete.
(6) Confirm the information on installation, and then
click“Install”to start installation.
(7) Click“Finish”when“InstallShield Wizard Complete”
dialog box appears.
(6) Click“Install”if the following warning window appears on
Windows Vista.
(7) Installation is completed when the wizard finishes.
Click“Close”.
(8) Click“Other devices”and then right-click on“USB Serial
Port”. Then click“Update Driver Software”.
(9) Repeat above step (3) through (7). Installation is
completed when the wizard finishes. Click“Close”.