KYORITSU KEW Windows for KEW 6315 Windows Vista/7/8 - Manual

KEW Windows for KEW6315 (4) Click “Next” after entering the user information and other
supplementary information.
(5) Confirm the information on installation, and then click
“ Install” to start an installation.
If a message requiring restarting your computer is
displayed, click“Yes” and restart your computer.
Installation process will then restart.
Restarting your computer is essential to install the
application properly.
(6) Click “Finish” when “InstallShield Wizard Complete” dialog
box appears.
Installation Manual
KEW6315
This manual contains instructions how to install the software
“ KEW Windows for KEW6315”supplied with KEW6315.
1. Introduction
● Interface
This instrument is equipped with USB and Bluetooth
interfaces.
Communication method : USB Ver2.0
Bluetooth : Bluetooth Ver2.1+EDR (Class2)
Compliant profile: SPP
The followings can be done by USB/ Bluetooth communication.
* Downloading files in the internal memory of the
instrument to a PC
* Making settings for the instrument via a PC
* Displaying the measured results on a PC in graphic form
in real-time,and also saving the measured data at the
same time
● System Requirements
･OS(Operation System)
For the supported OS, please check the version label on
the CD case or visit our homepage.
･Display1024 × 768 dots, 65536 colors or more
･HDD (Hard-disk space required)
1Gbyte or more (including Framework)
･.NET Framework (3.5 or more)
● Trademark
･ Windows ® is a registered trademark of Microsoft in the
United States.
･Bluetooth ® is a registered trademark of Bluetooth SIG.
The latest software is available for download from our
homepage.
http://www.kew-ltd.co.jp
KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
2. Installing“KEW Windows for KEW6315”
(For Windows 7 / Vista / XP)
(1) The followings shall be checked before installing this
software.
･ To prepare your system for installation, please close all
open programs.
･ Be sure NOT to connect the instrument to the PC until
installation completes.
･ Installation shall be done with Administrator right.
(2) Insert the CD-ROM in your PC's CD-ROM Drive.
Click the“Run KEWSetupLauncher2.exe”when the
“ AutoPlay”pop-up window appears on Windows Vista or
Windows 7.
If the installer does not run automatically, double-click the
“ KEWLauncher2.exe” in the CD icon. If the User Account
Control dialog box appears, click “Yes”.
(3) Read through and understand the License Agreement and
click “ I accept….”, and then click“ Next”.
(7) When the installation wizard completes, subsequent
installation initiates automatically.
If you rebooted your PC at step (5), double-click the CD
drive at “My computer” to show the following window.
(8) Repeat above step (3) through (6) and completes the
installation.
How to un-install the PC Software:
Access to the“ Control Panel” in the Start Menu at the lower
left on the Windows screen, and double-click on the “Add/
Remove Programs” to remove the “KEW WindowsV2” and
“ KEW Windows for KEW6315”.
(4) Read through and understand the License Agreement and
click “ I accept….”, and then click“ Next”.
(5) Click “Next” after entering the user information and other
supplementary information, and click “Next”. Ensure that
internet connection is established, otherwise the
installation of this application may be incomplete.
(6) Confirm the information on installation, and then click
“ Install” to start installation.
(7) Click “Finish” when “InstallShield Wizard Complete” dialog
box appears.
The following box will appear if .NET Framework3.5 is not
installed in your PC.
If a message requiring restarting your PC is displayed, click
“ Yes” and restart your PC. Run “KEWSetupLauncher2.exe”
from the CD after restarting the PC.
(8) When the installation wizard completes, subsequent
installation initiates automatically.
(9) Repeat above step (4) through (7) and complete the
installation.
* How to un-install the PC Software:
Access to the “Control Panel” and double click on the “Add/
Remove Programs”to remove the “KEW WindowsV2” and
“ KEW Windows for KEW6315”.
3. Installing USB driver
(Windows 7 / Vista)
(1) When KEW Windows for KEW6315 has been successfully
installed in your computer, the following dialog box appears
to start installing the USB driver. Click “Next”.
(2) Read through and understand the End User License
Agreement and click“ I accept….”, and then click“ Next”.
(3) If the following Security Warning message appears, click
“ Install”.
* If the following Security Warning message appears, click on
the “Install this driver anyway”. (It is no problem to continue
installing because operation has already been verified.)
(For Windows 8)
(1) The followings should be checked before installing this
application.
･ To prepare your system for installation, please close all
open programs.
･ Be sure NOT to connect the instrument to the PC until
installation completes.
･ Installation shall be done with Administrator right.
･ To use KEW Windows for KEW6315, .NET Framework 3.5
is required. If .NET Framework 3.5 is not installed in your
PC, it will be automatically installed when installing this
application. Internet connection is required to install .NET
Framework 3.5.
(2) Insert the CD-ROM in your PC's CD-ROM drive.
Then the following pop-up will appear at the upper right on
the screen.
Left-click on this box.
(3) Click and select “Run KEWSetupLauncher2.exe” when the
following box appears. If User Account Control dialog box
appears, click “Yes”.
If neither (2) nor (3) appears, run “KEWSetupLauncher2.exe”
from the CD.
(4) Installation completes when the following window appears.
Click “Finish”.
The USB driver has been successfully installed. Power on
KEW6315 first, and then connect to you PC.
To restart the interrupted USB driver installation
process, right click on the CD drive and click “Open”.
Click and start “kewusb101_setup.exe” in the
“ DRIVER” folder.