KYORITSU 6017 - Manual (Page 26)

24
7. Test Prods for Line Probe and Replacement
1. Types of test prods
Model 8072: Standard Test Prod
Used in ordinary situations. This type of prod is fitted to the line
probe at the time of shipment.
Model 8017: Extension Prod
Used in difficult-to-reach situations.
Model 8016: Pickel Prod (Optional):
Used to hook the line probe on a conductor.
2. How to Replace Prod
To remove the test prod, turn the cap of the line probe counter clockwise.
Insert the threaded end of another type of prod into the hexagonal hole on the
probe cap as shown. Then, turn the probe cap clockwise to secure it onto the
probe body.
Female Screw
Male Screw
Hexagonal Hole
Prod
Pickel Prod
Extension Prod