KYORITSU 2002R - Manual (Page 3)

― 26 ―
１．Safety Warnings
○ This instrument has been designed and tested according to IEC
Publication 61010 ； Safety Requirements for Electronic Measuring
Apparatus. This instruction manual contains warnings and safety
rules which must be observed by the user to ensure safe operation of
the instrument and to retain it in safe condition. Therefore, read
through these operating instructions before starting using the
instrument.
WARNING
● Read through and understand instructions contained in this manual
before starting to use the instrument.
● Save and keep the manual handy to enable quick reference
whenever necessary.
● Be sure to use the instrument only in its intended applications and
to follow measurement procedures described in the manual.
● Be sure to understand and follow all safety instructions contained
in the manual.
Be sure to observe the above instructions.
Failure to follow the above instructions may cause injury, instrument
damage and/or damage to equipment under test.
○ The symbol indicated on the instrument means that the user
must refer to related parts in the manual for safe operation of the
instrument. Be sure to carefully read the instructions following
each
symbol in this manual.
DANGER is reserved for conditions and actions that are likely to
cause serious or fatal injury.
WARNING is reserved for conditions and actions that can cause
serious or fatal injury.
CAUTION is reserved for conditions and actions that can cause
minor injury or instrument damage.