KROHNE OPTIBAR P 3050 C EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTIBAR P 3050 C
www.krohne.com 03/2012 - 4001953401 - MA OPTIBAR P3050C R02 en
Safety instructions
1.1 Intended use
The pressure transmitter series OPTIBAR OPTIBAR OPTIBAR OPTIBAR were designed and constructed to measure the
absolute and gauge pressure of gases, vapours and liquids. The available measuring ranges and
permitted maximum working pressures for each are indicated on the nameplate and described
in the "Technical data" section. To observe the intended use, adhere to the following points:
• Observe the instructions in this document.
• Comply with the technical specifications (for details refer to
Technical limits on page 6).
• Observe the permissible products (for details refer to Permissible products on page 6).
• Only suitably qualified personnel may install and operate the device.
• Observe the generally accepted standards of good practice.
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
CAUTION!
•
Any modification to the device, including drilling, sawing, trimming, welding and soldering of
parts, or partially painting over or coating, is prohibited.
• Neither is it permitted to use the device as a climbing aid e.g. for installation purposes, as a
holder for cables, pipes or other loads.
• The mounting or installation of parts is only permitted as described in this document, or
insofar as it has been authorised by the manufacturer or a certified service partner.
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
.book Page 5 Thursday, March 8, 2012 9:29 AM