KROHNE OPTIBAR P 3050 C EN - Manual (Page 14)

3
INSTALLATION
14
OPTIBAR P 3050 C
www.krohne.com 03/2012 - 4001953401 - MA OPTIBAR P3050C R02 en
Installation
3.1 Notes on installation
3.2 Storage
• Store the device in a dry, dust-free location.
• Avoid continuous direct sunlight.
• Store the device in its original packing.
• Storage temperature: -20…+70°C / -4…+158°F
3.3 Transport
• Use original packing for transport and ensure that the package does not get crushed or
damaged by sharp objects or other boxes.
• Do not throw or drop the device!
• Avoid temperatures below -20°C / -4°F and above +70°C / +158°F.
• Observe any transportation information found on the packing.
• When transporting by ship, use seaworthy outer packing.
3.4 Installation specifications
The accuracy of the measurement is only guaranteed if the transmitter and accompanying
impulse line(s), if any, have been correctly installed. In addition, extreme ambient conditions
including large fluctuations in temperature, vibrations and shocks should be kept as far away as
possible from the measuring equipment.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
INFORMATION!
Observe the storage information found on the package. Labels on the original packing must
always remain legible and may not be damaged.
INFORMATION!
Observe the relevant directives, ordinances, standards and accident prevention regulations (e.g.
VDE/VDI 3512, DIN 19210, VBG, Elex V, etc.).
.book Page 14 Thursday, March 8, 2012 9:29 AM