KROHNE OPTIBAR P 3050 C EN - Manual (Page 31)

SERVICE
6
31
OPTIBAR P 3050 C
www.krohne.com 03/2012 - 4001953401 - MA OPTIBAR P3050C R02 en
Display
It is also not permitted to repair faulty displays. They must simply be replaced by a new display
module. However, in this case, the reason for the damage or failure of the graphic display must
be reported. If the failure is the result of overheating or overloading the device, the entire device
must be marked clearly as defective, must be replaced and then disposed of properly. Repair is
not permitted!
6.2 Spare parts availability
The manufacturer adheres to the basic principle that functionally adequate spare parts for each
device or each important accessory part will be kept available for a period of 3 years after
delivery of the last production run for the device.
This regulation only applies to spare parts which are subject to wear and tear under normal
operating conditions.
6.3 Availability of services
The manufacturer offers a range of services to support the customer after expiration of the
warranty. These include repair, maintenance, technical support and training.
6.4 Repairs
Repairs may be carried out exclusively by the manufacturer or the manufacturer authorised
specialist companies.
INFORMATION!
For detailed information please contact your local representative.
INFORMATION!
For more precise information, please contact your local representative.
.book Page 31 Thursday, March 8, 2012 9:29 AM