KROHNE OPTIMASS 7000 EN - Manual (Page 14)

2
DEVICE DESCRIPTION
14
OPTIMASS 7000
www.krohne.com 04/2013 - 4001016302 - MA OPTIMASS 7000 R02 en
Thermal shock Thermal shock Thermal shock Thermal shock
Thermal shock occurs when there is a sudden and extreme change (shift) in process
temperature. To avoid thermal shock, refer to the following table for the maximum temperature
shift.
Meter Meter Meter Meter Maximum temperature shift Maximum temperature shift Maximum temperature shift Maximum temperature shift
Titanium +130°C / +266°F
Stainless Steel +80°C / +176°F
Hastelloy® +80°C / +176°F
Tantalum +80°C / +176°F
CAUTION!
Operation outside these limits may result in shifts in density and mass flow calibration. Repeated
shocking may also lead to premature failure of the meter! However, higher thermal shocks are
possible at lower working pressures. For more information, please contact your nearest
representative.
MA_OPTIMASS_7000_en_042513_4001016302_R02.book Page 14 Tuesday, July 2, 2013 5:23 PM