KROHNE SMARTSENS ORP 8150 EN - Manual (Page 35)

DESCRIPTION OF HART INTERFACE
7
35
SMARTSENS ORP 8150
www.krohne.com 11/2013 - 4002546702 - MA SMARTSENS ORP 8150 R02 en
4 Device Information Sensor information Order code
Device name
Serial number
HART ® ID
Polling address
Manufacturer ID
Date of manufacturing
SW version
HW version
Calibration Offset
ORP solution
No. of calibrations
Operating parameters
(OP)
Commissioning date
Operating hours
OP time > 80°C / 176°F
OP time > 110°C / 230°F
Max. temperature
Commissioning Set date of commissioning
5 Service
1 Service calibration Trimming at 4 mA (+/-)
Trimming at 20 mA (+/-)
2 Service parameter Reset of sensor
Load factory setting
3 Password Password protection Activate or deactivate the password protection.
Select between on and off.
Password operator Set password for operator
Password
administrator
Set password for administrator
Reset password Reset all passwords (only administrator)
4 Sensor lock Select between YES YES YES YES or NO NO NO NO to lock the sensor.
If you select YES YES YES YES the setting is not reversible anymore and the sensor is
invalid for use. The HART ® communication is not possible anymore.
.book Page 35 Monday, November 18, 2013 10:29 AM