KROHNE OPTISOUND 3000 Series EN - Manual (Page 11)

4 Mounting
4.1 Mounting procedure
The indicating/adjustment module can be mounted or
dismounted at any time. An interruption of the power
supply is not necessary.
Proceed as follows:
1 Unscrew the housing cover
2 Place the indicating/adjustment module to the re-
quested position on the electronics
Information:
Four different positions are possible, each displaced by
90°.
Fig. 3: Installation of the indicating/adjustment module
3 Press the indicating/adjustment module lightly onto
the electronics and turn it to the right until it snaps in
4 Screw housing cover with inspection window tightly
back on
Mounting/dismounting the
indicating/adjustment mo-
dule
Indicating/adjustment module for OPTISOUND sensors 11
Mounting
30603
-EN
-050401