Acura 2011 RDX - Manual (Page 154)

To stop the system's automatic
adjustment, do any of these actions:
● Press any button on the control
panel: SET, 1, or 2.
● Push any of the adjustment
switches for the seat.
●
Shift out of Park.
● Adjust the outside mirrors.
If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized positions. If you change
the memorized position, the indicator
in the memory button will go out. To
keep this driving position for later
use, you must store it in the driving
position memory.
Parking Brake
To apply the parking brake, push the
pedal down with your foot. To
release it, push on the pedal again.
The parking brake indicator on the
instrument panel should go out when
the parking brake is fully released
(see page
67 ).
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles. A beeper will sound if
the vehicle is driven with the parking
brake on.
You will also see a ‘‘RELEASE
PARKING BRAKE ’’ message on the
Push
PARKING BRAKE PEDAL
Driving Position Memory System, Parking Brake
150
10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu
the multi-information display (see
page
79 ).
2011 RDX