KEPCO HSF 300W Series (suffix A and AM) Operator Manuals - Manual (Page 7)

HSF(A) 300W 101013
5
Insulation Resistance: (at 25°C,
65% relative humidity) 100 Megohms minimum (500Vdc) Between output and ground, input and
ground, and input and output,
Humidity: Operating: 10% to 90% relative humidity
Non-operating: 10% to 95% relative humidity noncondensing,
Wet Bulb temperature <35°C
Vibration: 5-10 Hz., 10mm amplitude, 10-55 Hz., acceler-
ation 64.3ft./s
2 (19.6M/s 2 ) (2g)
non-operating 1 hr. on each of 3 axes, sweep
time 10 minutes
Shock: Acceleration: 643.5ft./s 2 (196.1M/s 2 ) (20g),
Pulse Duration: 11ms ± 5 msec
(non-operating, 1/2 sine pulse, three shocks
on each axis, Power Supply is fixed on its
bottom side)
Safety: Designed to meet UL: 60950-1; CSA:C22.2
60950-1; EN60950-1; CE Mark. Applies when input voltage is:
100 - 240V a-c, 50-60Hz
EMC Emission - Conducted: Designed to meet FCC Class B, VCCI-Class B, EN55011-B, EN55022-B
EMC Emission - Radiated: Designed to meet FCC Class B, VCCI-Class B, EN55011-B, EN55022-B
EMC Emission - Input harmonics
current: Designed to meet EN61000-3-2
EMC Immunity Designed to meet EN61000-6-2
EMC Radiated susceptibility: Designed to meet EN61000-4-3 level 3 normal operation
EMC Conducted susceptibility: Designed to meet EN61000-4-6 level 3 normal operation
ESD: EN61000-4-2, level 3 normal operation
Electrical fast transient burst: EN61000-4-4 level 3 normal operation
Surge withstand: EN61000-4-5, level 3 No damage
Power Frequency Magnetic Field: Designed to meet EN61000-4-8, level 4
(HSF 5-60AM: level 3) normal operation
Voltage dips interruptions and
variations EN61000-4-11 normal operation
Semi F47 200V a-c only
Dimensions: 5.22 in. (132.5 mm) x 4.288 in. (108.9 mm) x 16.86 in. (428.2 mm) (See Figure 3)
Mounting: Plug-in
Cooling: Forced air flow - fan
Frame Material/Cover Material: Steel
Weight 4.8 lbs, 2.18Kgs. HSF 300 A models
5.3 lbs, 2.40Kgs. HSF 300 AM models
TABLE 3. POWER SUPPLY RATINGS AND SPECIFICATIONS (CONTINUED)
CHARACTERISTIC SPECIFICATION CONDITION/NOTES