KEPCO CS 06 Chassis Slides (for EL Series Electronic Load) - Manual

©2011, KEPCO, INC 1
Data subject to change without notice 228-1734 REV 1
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
http://www.kepcopower.com email: [email protected]
An ISO 9001 Company.
CS 06
CHASSIS SLIDES MODEL CS 06
1. DESCRIPTION
Chassis Slides Model CS 06 contains the components required to install a pair of chassis slides on Kepco EL Series
Electronic Loads.
CAUTION: Use of components not provided herein may damage the unit and void the warranty.
2. INSTALLATION OF CHASSIS SLIDES
2.1 MATERIAL REQUIRED (SEE TABLE 1.)
TABLE 1. MATERIAL SUPPLIED
MATERIAL QUANTITY
One pair of slides (includes cabinet, intermediate and chassis
sections), Kepco P/N 108-0475
1
* End bracket 2
* Bar Nut 6
* Machine Screw, 10-32 X 1/2 in. long, Phillips head, Flat head 4
* Machine Screw, 10-32 X 3/8 in. long, Phillips head, Pan Head 12
* Machine Screw 10-32 x 1/4 in. long, PHPH, black, zinc oxide
(Kepco P/N 101-0531) *
7
CS 06 Instruction Sheet 228-1734 1
* Included with P/N 108-0475