Allied Telesis Layer 3 Gigabit Ethernet Switch x600-24Ts-POE - Manual (Page 39)

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide
39
Secure Digital (SD) LED
Both the x600-24Ts/XP and x600-48Ts/XP switches have one Secure
Digital (SD) LED shown in Figure 19 and defined in Table 8.
Figure 19. Secure Digital Slot LED
Table 8. Secure Digital LED
LED Function State Description
SD Link Status
and Activity Flashing
Amber Indicates a fault has been detected.
The SD card is not valid or a read or
write procedure was unsuccessful.
Solid
Green An SD card has been detected.
Flashing
Green An SD card is reading or writing data.
Do not eject the SD card when it is in
this state.
1616
BUSY
READY
FAULT
SD