DeFelsko PosiTector 200 v.1.2 - Manual (Page 12)

Page 12
IR Printer
Battery operated infrared printer receives data from
the Gage without connectors or cables. Great for
use in the field or back at the office.
Print Sample:
Gage info
Reading # Measurements
MODEL 200
S/N 1234
------------------------
# Reading
1 280 um
2 292 um
3 284 um
4 284 um
5 294 um
# 5
Min 280 um
Max 294 um
Mean 286.8 um
Std Dev 5.9 um
Statistics
Certified Thickness Standards
Certified Thickness Standards are available.
They are ideal for verifying the operation of
your Gage. All Certified Thickness Standards
ship with a Certificate of Calibration.
Plastic Shims
A variety of non-certified colored plastic shims are included. They provide a quick
operational check of the Gage. Place the shims on a hard, flat surface (i.e. glass)
and apply water only to the top of a shim. Plastic shims are not always manufac-
tured with the same material. Therefore it is not important that the Gage measure
their exact thickness, rather readings should be close to the specified thickness and
consistent.