Installation, Server – Avigilon Hirsch Velocity Integration User Manual
Page 5
Avigilon Control Center System Integration Guide with Hirsch Velocity
2
Installation
Server
1. Install the Avigilon Control Center Server software anywhere on your network.
2. Install the Velocity Server software and the Velocity SDK software on the same server.
3. Select a Windows user account for connecting the integration to Velocity.
The Windows user account must have Log On As a Service privilege in Windows and
must be an operator or be part of an operator group in Velocity.
4. To give the Windows user account Log On As a Service privilege, complete the
following steps:
a.
In Windows, open Administrative Tools and click Local Security Settings.
b.
In the left pane, expand Local Policies and select User Rights Assignment.
c.
Double-click Log on as a Service.
d.
Click Add a User or Group and enter the user account name in the following
window.
e.
Click OK.
5. To check which operator group the Windows user account is part of, open the
Windows Computer Management window.
a.
In the left pane, expand System Tools > Local Users and Groups > Users.
b.
Right-click the user and select Properties.
c.
Select the Member Of tab and see if any of the Velocity operator groups are listed.