Introduction, Requirements, For more information – Avigilon Jacques VoIP Voice Communication System Integration User Manual
Page 4: Requirements for more information

Avigilon Control Center System Integration Guide with Jacques VoIP Voice Communication System
1
Introduction
The Avigilon Control Center software integration with the Jacques VoIP Voice Communication
System allows alarms in Avigilon Control Center to be triggered whenever an intercom event is
activated in the Jacques System.
The Jacques system uses tags to communicate events between intercom units. Tags are a series
of numbers that users dial to call other intercom units and initiate specific actions. The integration
enables tags to be linked to specific Avigilon alarm actions. A possible use case for the
integration is for users to view video from a camera pointed at an intercom station. When a tag is
dialed from the Jacques intercom station, the corresponding alarm is triggered in the Avigilon
Control Center Client and the alarm video is displayed.
Requirements
For More Information
For more detailed information about the procedures outlined in this guide, refer to the specific
software documentation.
•
Avigilon Control Center Client User Guide
•
Avigilon Control Center Server User Guide
•
Tag Configuration for Jacques 650-series VoIP Voice Communication System
Vendor
Requirements
Avigilon
Control Center Server Software 4.0.2.4 or later
Avigilon
Avigilon Third Party Integration License:
ACC-JACQUES-NVR
Avigilon
Avigilon Jacques Gateway software integration:
JacquesGateway.exe
The file can be downloaded at
software/integration-and-plug-in-downloads/
Jacques
Jacques 650 Series VoIP Voice Communication
System
Jacques
High Level Interface (HLI)