Avigilon Lenel OnGuard Video & Event Viewer Integration - Manual (Page 4)

Avigilon Control Center 5 System Integration Guide with Lenel OnGuard
1
Introduction
The Avigilon Control Center 5.0 Video and Event Viewer integration with the Lenel
OnGuard
®
software allows users to use the Lenel OnGuard interface to access Avigilon
Control Center 5.0 features. Specifically, users can view live and recorded video, export
video, view video events and control PTZ devices from the Avigilon Control Center
through the OnGuard software.
Requirements
Upgrading from Avigilon Control Center 4
If you are upgrading to Avigilon Control Center 5.0 and the latest version of the Video and
Event Viewer integration software, simply run the installers and follow the prompts. All
your previous software settings are remembered, so you do not need to re-configure the
software.
Be aware that the Avigilon Control Center uses a new default port number (38880) for
server communication. The upgrade installers will automatically update the port numbers
accordingly. If you had set a custom port number, the system will continue to use the
custom port number.
Vendor Requirements
Avigilon Control Center Server Software 5.x and later
Avigilon Control Center Client Software 5.x and later
Avigilon Lenel Integration NVR Licence:
ACC5-LENL-ONGRD
If you are also using the Alarm Gateway integration, this one
license will work for both integrations.
Avigilon Avigilon Lenel integration executable file:
OnGuard Avigilon v5.0 Accessory Add-On.msi
The file can be downloaded at
http://avigilon.com/support-and-downloads/for-
software/integration-and-plug-in-downloads/
Lenel OnGuard version 6.5.624, 6.6.286
Lenel OnGuard Video Security Server Software License:
SWS-DV
Lenel 8 Camera Channel Device Licence
DV-CH-8UP