Avigilon ACC Mobile Version 1.4.0.2 for iOS - Manual (Page 6)

1. Tap Gateways. Since there are currently no Gateways, you are automatically taken to the Add Gateway
screen.
If a Gateway has already been added, you would be taken to the Gateways screen where all the
configured Gateways are listed. Tap Add Gateway to add a Gateway.
2. Enter the Gateway IP Address/Hostname.
3. Enter the Gateway’s Port Number. The port number is 443 by default.
NOTE: The app always tries to make a secure connection to the Gateway via HTTPS. If that fails, it will
attempt an HTTP connection. If the app is able to connect via HTTP, you will see an error message
advising you that you are making an unsecured connection.
By default, the Gateway uses port 443 for all HTTPS connections, and port 80 for all HTTP connections.
4. Enter your username and password for the Gateway.
5. Tap Done.
Logging in to a Site
On the Gateways screen, you have access to the Sites that are connected to the Gateway.
NOTE: If you are running Control Center 4, enter your server details when the app refers to a Site.
3 Logging in to a Site