Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 29)

Method:
• Place the coarse grit solid abrasive
face up on your machine
• Sharpen on right side of wheel so it is
spinning away from you.
• Start on the back, right side edge
of the shovel and roll the shovel to
sharpen the entire surface of the
cutting edge.
• Inspect after first pass to check
progress.
• Re-grind as needed to create a clean,
sharp edge on the tool.
1
2
3
Shovel in sharpening position
Coarse solid abrasive (P60–P80 grit)
4
5