Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 19)

Method:
• Place the coarse grit solid abrasive
face up on your machine.
• Adjust the Top Tool Rest to a low
position above the wheel.
• Holding chisel firmly, place the chisel
on the Top Tool Rest
• Slowly lay the chisel cutting edge
onto the abrasive disk
• Flip chisel and grind the other bevel
of the chisel.
• Repeat until desired finish and
sharpness is attained.
1
2
3
Tool on Top Tool Rest
Coarse solid abrasive (P60–P80 grit)
4
5
6