Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide User Manual
Page 10
Lathe Tools: Gouges,
Parting Tools, Scrapers
& More
Objective:
Create a sharp lathe tool with the follow-
ing features:
4
A sharp cutting edge with a prominent burr
4
A cutting edge that is shaped correctly for
the cut profile desired
4
Note: The goal is to recreate the same
geometry as originally supplied by the
manufacturer, but with a new sharp edge.
Where to Sharpen:
4
Edge-Vision™ Port
Abrasive Selection:
4
Coarse slotted Edge-Vision™ abrasive
(P60 – P80 grit)
Top Tips:
Use a black marker to color the edge to be
sharpened.
Use a shop/drop light to increase visibility
of edge being sharpened.
Start at the heel of the bevel and work
towards the cutting edge.
Sharpen with lathe tool at the 2:00 position
in the port to create a burr and avoid
tearing the abrasive.
Practice on an older tool before sharpening
your favorite lathe tool.
Creating a burr while sharpening is
important for lathe tools to work correctly.
While the naked eye
can’t see the burr
preferred by lathe
tool users, you can
definitely feel the
difference.
After
WORK SHARP