Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 13)

Method:
• Place the fine grit solid abrasive face
up on your machine.
• Lay the blade face flat on the right
side of the wheel.
• Use left hand to apply downward
pressure onto tool.
• Pull tool toward yourself and swipe
the tool off the abrasive disk.
• Flip blade face and repeat on other
side.
• Raise handle of putty knife or scraper
to create a beveled edge if desired.
1
2
3
Raise handle to grind bevel edge
Fine solid abrasive (P180–P320 grit)
Blade flat on right side of wheel
Fine solid abrasive (P180–P320 grit)
4
5
6