Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 25)

Method:
• Place the coarse grit solid abrasive
face up on your machine.
• Adjust the Top Tool Rest to the low
position. Or, in some cases, it may be
easier to remove the tool rest.
• Firmly hold the blade with both
hands.
• Lay the blade cutting edge onto the
abrasive disk to grind and flatten
the back.
• Remove blade and inspect area being
ground. You may wish to replace the
Top Tool Rest in order to make the
bevel on the other side of the blade.
• Continue to sharpen until desired
finish and sharpness is attained.
• Rotate blade and sharpen other side.
1
2
3
Beveling edge using Top Tool Rest
Coarse solid abrasive
Flattening back of blade
Coarse solid abrasive (P60–P80 grit)
4
5
6
7