WEN 6501 4 x 6 Belt / Disc Sander - Manual (Page 9)

Know Your Belt/Disc Sander
Unpacking
WARNING: To avoid injury from accidental starting, turn switch OFF and remove plug
from power source outlet before making any adjustments.
Carefully unpack the belt/disc sander and all its parts, and compare against the list below. Do not
discard the carton or any packaging until the belt/disc sander is completely assembled. If any parts
are missing or broken, please call our customer service at (888) 315-3080.
1 Machine body 4 Stop plate 7 Miter gauge
2 Table 5 Front cover 8 Aluminum disc
3 Disc cover 6 Rubber pad(4) 9 Allen wrench
10 Wrench
Not shown:
1-6” Sanding Disc
1-4” x 36” Sanding Belt (assembled on machine)
Model: 6501 wenproducts.com 9