Accessories, Lane end d.h.moppett (man director) – Universal Air Tools UT8824 User Manual

Page 4

Distributor

Notes

Page No 4

Accessories

6) Check hose and fittings regularly for wear. Do not carry the

tool by its hose and ensure that the hand is remote from the

on/off valve (trigger) when carrying the tool with air supply

connected.

7) Do not exceed maximum recommended air pressure. Avoid

low air pressures as this will allow the drill to stall more easily

and develop torque reaction.

8) Use safety equipment as recommended.

9) The tool is not electrically insulated. Do not use where there

is a possibility of coming into contact with live electricity, gas

pipes, water pipes, etc. Check the area of operation before

performing the operation.

10) Take care against entanglement of moving parts of the tool

with clothing, ties, hair, cleaning rags, etc. This will cause the

body to be moved towards the work process and can be very

dangerous.

11) Do not attempt to hold or guide the drill chuck when the tool

is running. Keep hands clear of the drilling process.

12) Use only compressed air at recommended conditions.

13) Do not attempt to fit attachments, i.e. for sawing, hedge

cutting, grinding, chain sawing, etc.

14) If the tool appears to malfunction remove from use

immediately and arrange for service and repair.

15) If an additional side handle is fitted to the tool ensure that it

is correctly positioned and fixed securely.

16) If the drill is used with a balancer or other suspension device

ensure that it is fixed securely.

Declaration of Conformity

Universal Air Tool Company Limited

Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England

declare under our sole responsibility that the product

Model UT8824 3/8” Capacity Pistol Drill, Serial Number

to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Part 1, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EEC

Place and date of issue

Name and signature or equivalent marking of authorised person

Lane End

D.H.Moppett (Man Director)

This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited

Designed & Written in the U.K.