Accessories, Lane end d.h.moppett (man. director) – Universal Air Tools UT5964 User Manual

Page 4

Distributor

Notes

Page No 4

Accessories

using the tool.

10) Use only correct spare parts. Do not improvise or make

temporary repairs.

11) Do not lock, tape, wire, etc. the on/off valve in the run

position. The trigger/lever etc. must always be free to return

to the 'off' position when it is released.

12) Always shut off the air supply to the tool, and depress

the trigger/lever etc. to exhaust air from the feed hose before

fitting, adjusting or removing the working attachment.

13) Check hose and fittings regularly for wear. Replace if

necessary. Do not carry the tool by its hose and ensure the

hand is remote from the on/off control when carrying the

tool with the air supply connected.

14) Take care against entanglement of moving parts of the

tool with clothing, ties, hair, cleaning rags, etc. This will

cause the body to be drawn towards the tool and can be

very dangerous.

15) It is expected that users will adopt safe working practices

and observe all relevant legal requirements when installing,

using or maintaining the tool.

16) Do not install the tool unless an easily accessible and

easily operable on/off valve is incorporated in the air supply.

17) Take care that the tool exhaust air does not cause a

problem or blows on another person.

18) Never lay a tool down unless the working attachment

has stopped moving.

19) Always ensure that the reverse button is in the selected

position before starting the tool.

20) Do not use bits or sockets with excessive wear to the

input and output drives. Make sure the bit, socket, extension

is firmly fixed to the tool.

21) When loosening fasteners first ensure that there is

sufficient clearance behind the tool to avoid hand entrapment.

The tool will move away from the threaded joint as the

nut/bolt is loosened and rides up the thread moving the

tool with it.

Declaration of Conformity

Universal Air Tool Company Limited

Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England

declare under our sole responsibility that the product

Model UT5964 Pistol Reversible Screwdriver, Serial Number

to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 7, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives

Place and date of issue

Name and signature or equivalent marking of authorised

Lane End

D.H.Moppett (Man. Director)

This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool

Designed & Written in the U.K.