Universal Air Tools UT5761 - Manual (Page 4)

Accessories
Distributor
Notes
Page No 4
Declaration of Conformity
Universal Air Tool Company Limited
Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England
declare under our sole responsibility that the product
Model UT5761 Extended Cut Off Tool, Serial Number
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Parts 1 & 4, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives
Place and date of issue Name and signature or equivalent marking of authorised person
Lane End D.H.Moppett (Man. Director)
This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited
©Copyright of Universal Air Tool Company Limited, established in the United Kingdom, 1994
Designed & Written in the U.K.
cannot move during the cutting process.
33) If the tool is dropped do not use unless the wheel is first checked for
damage by a competent person.
34) When not in use the tool should be stored in a safe place where it
will not be damaged. If a tool has not been used for a period of time
check the tool as for the first time of using.
35) Be aware that if the cutting process causes high vibration, special
precautions should be taken.
36) The operator should be aware that the cutting wheel will continue
to rotate after the power supply has been shut off. This could cause a
hazard.
37) Always store cutting wheels in accordance with the manufacturer’s
instructions.
38) Check frequently that the spindle thread has not become damaged
or worn.
39) Always ensure that the cutting wheel has a higher permissible
running speed to the speed of the tool.