U.S. Sunlight 2014ST Light Kit - Manual

www.ussunlight.com
[email protected]
Light Kit for Model 2014ST
Installation and Mounting Guide
The Light Kit can be installed in both flex tube and rigid tube versions of the 2014ST.
Please read the entire instructions before proceeding with the installation.
Tel: 877 55 US SUN (877-558-7786)
© Copyright 2011 US Sunlight Corp, Inc. 2014ST-LTK-C01_ver1
DESCRIPTION BOX CONTENTS / PARTS LIST
1. Socket Assembly (1 ea)
2. Clamp Combination Connector (1 ea)
3. 90° Connector (1 ea)
4. Threaded Nipple & Locknut (1 ea)
5. Connecting Bracket (1 ea)
6. Wire nut (2 ea)
7. Reinforcement Ring (2 ea)
8. Wing nut (3 ea)
9. Leg (3 ea)
10. Flex Conduit (1 ea)
11. Foil Tape
1.
USE 60 WATT MAXIMUM
LIGHTBULB
We recommend using a
100 Watt equivalent Compact
Flourescent Light Bulb (CFL)
(not included)
2. 3.
4.
5.
9.
10. 6.
7. 8.
TOOLS REQUIRED
OTHER MATERIALS NEEDED
a. Pliers
b. Wire Strippers
c. Scissors
d. Phillips Screwdriver
e. Ultility Knife
f. Marker
g. Drill with Phillips bit
h. Electrical Tape
i. Jig Saw or Circular Saw
j. Measuring Tape
k. *Assorted Drill Bits
a.
b.
c.
d.
e.
f.
g.
k.
h.
j.
i.
k.
3/32” 5/32” 3/4”
(hole saw bit)
*REQUIRED ONLY
FOR
INSTALLING IN
A RIGID TUBE
Start hole with 3/32”
Enlarge with 5/32”
Complete with 3/4”
1a. 1b.
1c.
1d.
1e. 1f.
DESCRIPTION (Must be Purchased Separately)
1a. Metal Junction Box (1 ea)
1b. Box Cover (1 ea)
1c. Clamp Combination Connector (1 ea)
1d. 1” to 1 1/4” Screw (2 ea)
1e. 3” Deck Screw (8 ea)
1f. 2” x 4” x 8’ board lumber (1 ea) You will need to build
a support structure as
shown here
11.