Triton FT5000 User Manual - Manual (Page 56)

3 6
M
ODEL
FT5000 U
SER
M
ANUAL
2. Move the pusher plate to the rear
of the cassette (toward the handle).
Ensure the pusher plate is fully
back. It should stay in this posi-
tion. (Figure 4-9)
Figure 4-8. Release button.
Figure 4-9. Lid open and pusher
plate back.
• Slanting pile
To avoid dispensing problems caused
by a “slanting” pile, put the notes in
neat bundles of no more than ½ to ¾
inches in thickness. Turn every other
bundle around to minimize slanting of
the pile. (Figure 4-10)
• Cupped bundle
To avoid dispensing problems caused
by cupped bundles, turn all the bundles
with the cupped side towards the dis-
pense opening. (Figure 4-11)
• Common notes
Place the prepared bundles in the cas-
sette.
Figure 4-10. Slanted piles.
1. Load the cassette with currency.
The shape of some notes may be
affected by conditions of storage
or bundling, preventing them from
forming neat even piles. If not cor-
rected, such conditions may cause
notes to be rejected by the dis-
pensing mechanism. To compen-
sate for the most common condi-
tions of slanting or cupped note
piles, follow the directions given
here. Notes with no apparent shape
problems are referred to as “com-
mon” notes.
L
OADING
N
OTE
C
ASSETTES
Figure 4-11. Cupped bundle.