Triton FT5000 User Manual - Manual (Page 143)

123
E
RROR
R
ECOVERY
1. Press and hold down the Control
(CTRL) key (blank key in lower
right corner of alphanumeric
keypad). While holding down the
CTRL key, press the number (1)
key. Release both keys. The
Password Entry screen appears.
(Figure 7-2)
2. Enter the Master or User password
at the Password Entry dialog
prompt. The Management
Functions main menu appears.
(Figure 7-3)
3. Depending on the error message,
check the parameter/setup for the
particular error (Ex: Bill Size Not
Configured - check cassette
parameters).
You MUST try to correct the fault
FIRST, before attempting to reset error.
4. Select the Diagnostics option by
pressing number (2) on the
alphanumeric keypad. The
Terminal Diagnostics main menu
appears. (Figure 7-4)
5. Select the Terminal Status option
by pressing number (1) on the
alphanumeric keypad.
6. Select Reset Terminal Error
option by pressing number (3) on
the keypad. The terminal will
attempt to clear the error status.
7. If successful, the terminal will
resume normal conditions.
Fig. 7-3. Terminal main menu.
Fig. 7-4. Terminal diagnostics
menu.
Fig. 7-2. Password entry.
Clear Status Using Management Functions
A