Triton 9200 Operation Manual - Manual (Page 118)

5-82
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T RITON S YSTEMS , I NC .
M ODEL 9200 S UPER S CRIP TM O PERATION M ANUAL
F
UNCTION
: BACKUP NUMBER
F
ACTORY
D
EFAULT
: NONE
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the BACKUP NUMBER option.
D
ESCRIPTION
:
The Terminal communicates with your Processors’ host computer over a dial up phone line. Some
processors allow a backup phone number to try if the primary number fails to connect.
When this function is selected, the current phone number is displayed (if nothing appears on the
screen, no number is set). Select CHANGE to blank the current entry, and then enter the desired
phone number. The phone number may be up to 30 digits long. It can also contain a dialing prefix,
such as a ‘9’ for an outside line, if necessary. If you need to pause after the prefix, place a comma
in the number for a two-second delay at that point. Pressing the key first, then the <0>
key, followed by the select the comma. Make sure to enter the long distance
prefix ‘1’ if you are dialing an 800 number or a toll long distance number. Do not enter dashes in
the number.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.