Triton ARGO Installation Manual - Manual (Page 17)

17
ARGO I
NSTALLATION
M
ANUAL
C
ABINET
I
NSTALLATION
The following procedure applies to installing the cabinet assembly using the standard (P/N 06200-00066)
anchor kit. The anchor kit is not supplied with the unit. Call Triton at 888-7-ATMGURUS for availability.
* IMPORTANT *
The ARGO ATM is designed for INDOOR use only!
1. Carefully inspect the shipping container for any damage and report any damage immediately to the shipping
company. Refer to the warranty information in the User Manual for information about reporting shipping
damage.
2. Remove the ATM cabinet from the carton by cutting the straps and removing the top of the box.
3. Remove the packing material from inside of the box.
4. Remove the silver key from the white plastic bag attached to the ATM wrapping.
5. Remove the remainder of the box from the ATM if necessary.
6. Remove the wrapping from the ATM.
7. Use the silver key to unlock both the control panel and the fascia door (which conceals the locking
mechanism) on the front of the cabinet. Open the fascia door.
8. Lift the handle under the bill chute to open the front enclosure door. If the door is locked, see the sidebar
on this page for help in unlocking the electronic or mechanical lock, if applicable.
9. Remove the packing material from inside the vault enclosure and the control panel area.
10. The accessory box is shipped inside the cabinet enclosure. Open and inspect the contents. Check the contents
against the enclosed packing list and report any missing parts to Triton.
11. Unbolt the ATM from the shipping pallet. Walk the ATM off of the pallet using caution. The ATM is heavy.
U
NPACK
ATM
**WARNING**
DO NOT APPLY POWER TO THIS TERMINAL UNTIL THE INSTALLATION IS COMPLETE!!