Introduction – SnowEx SS-4000 User Manual

Page 3

Introduction

This operating manual is intended to help you to get to know the SS-4000 and how to operate it safely, correctly and economically. If you
observe these instructions, you will prevent hazards, reduce repair costs and breakdown times, and increase the reliability and service life of
the machine.

This manual must be read and used in conformity to existing workplace regulations. The manual must be made available where the machine
is being used.
The manual must be read and used by every person who will be working with or on the machine, such as for

• Operation (including preparation, repair during operation, & clean-up)
• Repairs (maintenance, inspection, overhaul), and/or
• Transport.

All established technical regulations for safety and proper working practice must be observed in addition to this manual and any applicable
regulations for the prevention of accidents. Should you lose your Owner’s Manual or would like extra copies, they can be purchased at your
SnowEx dealer.

THIS SIGN SHOULD ALERT YOU:
The Society of Automotive Engineers has adopted this Safety Alert Symbol to pinpoint characteristics that,
if not carefully followed, can create a safety hazard. When you see this symbol in this manual or on the
machine itself, be alert! Your personal safety and the safety of others is involved.

Defined below are the Safety Alert Messages.

DANGER
Information that, if not carefully followed, can cause death.

WARNING
Information that, if not carefully followed, can cause serious personal injury or death.

CAUTION
Information that, if not carefully followed, can cause minor injury or damage to equipment.

IMPORTANT
This symbol is used to call out information that is important to follow carefully.

Note: Some of the photos in this manual show the SS-4000 with the optional Mult-Purpose Brush Kit SBK-020.

IMPORTANT EQUIPMENT INFORMATION

Record important machine information here for quick reference. This information can be found on the serial number plate located at the back
of the machine on the wheel drive enclosure.
Model _______________________________________
Serial # _______________________________________
Engine Model

________________________________

Engine Serial #

________________________________

Date Purchased ________________________________
Dealer where purchased
_______________________________________________
See separate Warranty Information Card for your warranty coverage.

Model: SS-4000

Engine: Honda GXV160
HP: 4.3
Weight: 238 lbs

Manuf. 2013

Serial No. T1-100000

TrynEx International LLC
531 Ajax Drive
Madison Heights MI 48071
USA

Example