SnowEx SS-4000 - Manual (Page 14)

14 © TrynEx International 2013 (REV A) F51067A
Operating Instructions
Plow Blade
To install the Plow Blade, Lift the Plow and hold it at an angle; slide it over the receiver bar and lower it into position.
An angled setting must be used when plowing snow.
The plow can be removed when clearing small amounts
of snow – one inch or less (2.5 cm).
For snow over one inch (2.5 cm), use the plow blade.
The SS-4000 can clear a maximum of 5-1/2 inches (14
cm) snow in one pass. If snow is heavy, the capacity will
be less.
See “Freewheel” to adjust freewheel correctly for plow-
ing snow.
1 2
3