SnowEx SS-4000 User Manual
Page 19
19
© TrynEx International 2013 (REV A) F51067A
Maintenance Instructions
Replacing/Changing the Brushes
Loosen the nut on the
axle. Use two 19 mm
wrenches.
Remove the axle with the
right brush.
Parts after disassembly.
If replacing the Multi-
Purpose Brushes, or
changing to them: The
black row of bristles must
touch the ground before
the white row when the
brush rotates.
If replacing the Snow
Brushes (standard), or
changing to them: The
rows must curve upward
from the left.
Note: Multi-Purpose
Bristle shown for clarity.
Refer to the Assembly Instructions for installing the new brushes.
Remove the left brush.
IMPORTANT
Check the brushes after every 20 hours use. The brushes must be replaced if you are no longer satisfied with the brushing
result, or if the brush diameter is below 8-5/8 inches (220 mm).
Axle
Nut
Locknut
Washer
Cap
Left Brush
Right Brush
- SD-95 (24 pages)
- PWS-100 (40 pages)
- PPT-175 (1 page)
- PMT-175-C (3 pages)
- PMT-175 (3 pages)
- OFK-020 (2 pages)
- MGK-020 (2 pages)
- HRK-020 (8 pages)
- GAK-020 for SP-575 and SP-1075 (2 pages)
- DRM-175 (2 pages)
- ADF-020 For SP-575 and SP-1075 (2 pages)
- PWX-200 (28 pages)
- RHT-375 (2 pages)
- RHT-380 (12 pages)
- SD-600 Installation (12 pages)
- SD-600 Owners Manual (12 pages)
- TPR-020 (2 pages)
- SL-80 (28 pages)
- SP-100 (25 pages)
- SP-575X (28 pages)
- SP-725G (21 pages)
- SP-125 / US-100 (27 pages)
- SP-1575 (32 pages)
- SP-65 (24 pages)
- SP-3000 (31 pages)
- Bulk-Pro 1875 (51 pages)
- SP-2400 (35 pages)
- SP-2200 (36 pages)
- SP-7000 Assembly Instructions (12 pages)
- SP-7000 Owners Manual (16 pages)
- SP-7550 (36 pages)
- SP-85 (28 pages)
- SP-8550 (37 pages)
- SP-8500 (34 pages)
- SR-110 (28 pages)
- VBR-400 (12 pages)
- SP-9800X (40 pages)
- SP-9500X (40 pages)
- SP-9300X (40 pages)
- SP-9300 (40 pages)
- Wireless Spreader Key Fob Mating (1 page)
- SSH-175 (1 page)
- TLR-175 (1 page)
- TPM-175 (1 page)