SnowEx SS-4000 User Manual

Page 12

Text mode
Original mode

Operating Instructions
Adjusting Ejection Direction

There are five different settings available for the ejec-
tion direction.
Here: Forward Ejection Direction. The swept material
will heap up in front of the brushes. You should give
preference to angled brush settings.

With an angled setting, the material will be swept to one
side.
Here: Material will be ejected to the left.

To adjust brush angle: Lift the lever; Turn the brush in
the desired direction; Release the lever and ensure the
lever is latched in place.
Here: Material will be ejected to the right.

A sideways setting is recommended if using the op-
tional Debris Collector. This will allow sweeping against
a wall or curb. (Debris Collector Box is an Optional
Accessory).

If you use a plow, an angled direction must be used.
Here: Ejection to the Left.