Avaya Residential Gateway-I - Manual (Page 33)

Residential Gateway-I - Getting Started Guide 4-5
Using your Residential Gateway-I - Residential Gateway-I Buttons
Reset button
This button allows you to recover from a situation where for some reason the
Residential Gateway-I is in a deadlock situation and has the same effect as
disconnecting the Residential Gateway-I from the power supply source.
After the reset, the Residential Gateway-I will default to the last known
configuration profile.
! CAUTION:
Pressing the reset button will disable all network communications for
a few minutes.
Reload button
Use this button only in special situations when you are no longer able to
connect to your Residential Gateway-I, for example when you have forgotten
the Residential Gateway-I password or Encryption Key.
This button will disable the encryption key and the password. It also resets
the DHCP settings of the device, allowing you to access the Residential
Gateway-I again.
! CAUTION:
Pressing the Reload button changes the Residential Gateway-I
settings. To prevent irreversible changes, carefully follow the
instructions for the reload procedure.