Avaya Residential Gateway-I - Manual (Page 18)

2-6 Residential Gateway-I - Getting Started Guide
Connect & Power Up - Power-up the Unit
Power-up the Unit
1. Plug the power adapter into an AC power outlet.
! WARNING:
After applying power to the Residential Gateway-I, do not cover the
unit or block the airflow to the unit with any other objects.
Figure 2-6 Residential Gateway-I LEDs
2. Monitor the LED activity on the unit.
The LEDs (see Figure 2-6) will change color in the range Yellow, Red
and Green to indicate start-up diagnostics. When finished (after
approximately 30 seconds), the Residential Gateway-I shows LED
activity as listed in Table 2-7 on page 2-7.