Seed Hawk LOUP III & VIPER PRO 2013 - Hydraulic Drive Calibration Guide User Manual
Page 6
Seed Hawk
®
Manual Calibration Guide
5
NOTE
The “Calibration Numbers Chart” is a starting
point ONLY. Fine tuning of the calibration number
is necessary to achieve desired accuracy.
Use the “Rate Check Procedure” to further verify
calibration number accuracy. (Pg. 20)
If desired product is not present in the
“Calibration Numbers Chart” a static calibration is
needed.
See “Static Calibration Procedure” relating to
your control system.
(Loup III or Seed Hawk Viper Pro™)
THIS BOOKLET PERTAINS TO HYDRAULIC DRIVE
SYSTEMS ONLY.